Brand New A/C Compressor Mercedes W164 2005-2011

FREE SHIPPING WITHIN AUSTRALIA
RRP: $942.34

Our Price: $590.00 inc.GST

All components in this Compressor are 100% brand new. Designed and manufactured to replace the original A/C Compressor from your vehicle. Our replacement compressors come pre-filled with oil, pre-installed clutch, coil and pulley for easy installation.

In stock


Part Number: 14045
Quantity
SKU: CM5493 CXD6371-2 Category: Tag:

Product Description

BrandAftermarket
WarrantyOne Year
Pulley Section8 Groove
Clutch Diameter100mm
Compressor MountingDirect Mount
Fitting TypePad
Suits Unit Make7SEU16C
SeriesDenso
Voltage12
Weight6.7kg
SuitsMercedes W164 2005-2011

Additional Information

Weight6.7 kg
Dimensions28 × 20 × 20 cm
Before purchasing this product, please read our Policies in the tabs below.
  • Fitment
    We have Thousands of Part Numbers within our data base for easy part/s identification. Simply enter your Original Part Number into the search bar and an instant match will often result. All pictures shown within our listings are accurate. A Visual Comparison to your Original Part is Highly Recommended. Every effort is made to list our items as accurately as possible. It is the responsibility of the purchaser to determine if the listed part is correct for the intended purpose. If you are unsure please contact our friendly support team before ordering.
  • Refunds/Returns
    Any compressor incorrectly purchased will be accepted for credit if returned within 30 days in new unused condition with all tags and packaging. A refund will only be issued if we cannot supply the part ordered. Please be aware we do not refund for incorrect purchases or change of mind. If you are unsure please contact our friendly support team for assistance. Once fitted no part can be accepted for a credit or return. Any part accepted for credit will be subject to a 12.5% Restocking Fee.
  • Warranty

    All new parts come with a 1 year warranty from original date of purchase.

    When installing a new compressor please follow the installation procedure.

    (1) Whenever a compressor is to be replaced, the A/C system should be thoroughly flushed with an approved flushing agent. Any residual solvent must be removed with compressed air or nitrogen.

    (2) The receiver/dryer or accumulator must be replaced.

    (3) If your vehicle is equipped with an orifice tube, you must replace it as well.

    (4) Parallel flow condensers cannot be thoroughly flushed and need to be replaced. Tube and fin condensers can be flushed and do not need replacing.

    (5) All our compressors come pre-charged with oil, it is advised the oil be drained and refilled to your vehicle manufacturers specifications. (This information will often be located on a decal under the bonnet or on the radiator support panel.)

    (6) Once fitted and oil charge is complete, rotate compressor clutch by hand a minimum 10 times. A concentration of oil in the compressor can cause damage on initial start up. (By doing this simple step this scenario can easily be avoided.)

    (7) Once the system is flushed and new parts are installed, the system should be evacuated for a minimum of 30 minutes.

    (8) Recharge with the correct amount of refrigerant.

    In the unlikely event you need to make a warranty claim please attach a copy of your receipt clearly showing the above steps had been carried out by an ARC (Australian Refrigeration Council) licensed technician, auto electrician or motor mechanic, along with a copy of your original receipt as proof of purchase.

    Failure to follow the installation procedures will void your warranty.

    Any part subject to a warranty claim must be returned for assessment. Any part found to be defective due to a manufacturing defect will be either repaired or replaced at the discretion of Cool Car Air Conditioning. Warranty covers parts only, sold by us from the original purchase date. We accept no lability for any consequential loss, damage or any other associated costs. By purchasing through us you agree to these terms.