Genuine OEM A/C Compressor Peugeot 207, 298, 307, 308, 508, 5008, 2002-2018

FREE SHIPPING WITHIN AUSTRALIA
RRP: $1,156.55

Our Price: $842.10 inc.GST

We work directly with manufacturers and wholesalers to offer Genuine OEM A/C compressors at a fraction of the dealership list price. All our OEM Compressors come pre-filled with oil, pre-installed clutch, coil and pulley for easy installation.

Available on backorder


Part Number: 15009
Quantity
SKU: CM1350 CM1356 CXS136 INLT300-1 Category: Tag:

Product Description

Brand Sanden
Warranty One Year
Clutch Diameter 119mm
Compressor Mounting Direct Mount
Fitting Type Vertical Special Pad
Voltage 12
Pulley Section 6 Groove
Series SD6C12
Suits Unit Make Sanden
Weight 6kg
Suits Peugeot 207, 298, 307, 308, 508, 5008 2002-2018

Additional Information

Weight 6 kg
Dimensions 28 × 20 × 20 cm

This product is suited for:

Year Make Model
Year Make Model
2002 - 2006 Peugeot 307
2007 - 2012 Peugeot 207
2007 - 2018 Peugeot 308
2008 - 2009 Peugeot 307
2011 - 2017 Peugeot 508
2012 - 2018 Peugeot 208
2013 Peugeot 5008
2017 - 2018 Peugeot 5008

PEUGEOT 207 (WA, WC) (2006-2015)
PEUGEOT 207 CC (WD) (2007-2015)
PEUGEOT 207 SW (WK) (2007-2013)
PEUGEOT 207 Van (WA, WC) (2006-0n)
PEUGEOT 208 Box (CR) (2012-0n)
PEUGEOT 208 I (CA, CC) (2012-0n)
PEUGEOT 307 (3A/C) (2000-2012)
PEUGEOT 307 Break (3E) (2002-2009)
PEUGEOT 307 CC (3B) (2003-2009)
PEUGEOT 307 SW (3H) (2002-2009)
PEUGEOT 308 CC (4B) (2009-2015)
PEUGEOT 308 I (4A, 4C) (2007-2016)
PEUGEOT 308 SW I (4E, 4H) (2007-2014)
PEUGEOT 5008 (0U, 0E) (2009-2017)
PEUGEOT 508 I (8D) (2010-2018)
PEUGEOT 508 SW Box Body/Estate (8E) (2011-0n)
PEUGEOT 508 SW I (8E) (2010-2018)
PEUGEOT PARTNER Box (2008-0n)
PEUGEOT PARTNER Platform/Chassis (2009-0n)
PEUGEOT PARTNER Tepee (2008-0n)

  • Fitment
    We have Thousands of Part Numbers within our data base for easy part/s identification. Simply enter your Original Part Number into the search bar and an instant match will often result. All pictures shown within our listings are accurate. A Visual Comparison to your Original Part is Highly Recommended. Every effort is made to list our items as accurately as possible. It is the responsibility of the purchaser to determine if the listed part is correct for the intended purpose. If you are unsure please contact our friendly support team before ordering.
  • Returns
    Any part incorrectly purchased will be accepted for credit if returned within 30 days of the purchase date. Any part returned for credit will be credited the full purchase price minus any shipping fees. Refunds are accepted for parts returned within 30 days of the purchase date. All refunds incur a 20% restocking fee. Any part returned for credit or refund must be in New Unused Saleable Condition in the Original Packaging. It is the responsibility of the purchaser/installer to ensure the part is correct for the application prior to fitting. Any parts fitted will not be accepted for credit or refund and cannot be returned.
  • Warranty

    All New A/C Parts come with a One Year unlimited kilometre Warranty from the original purchase date.

    Correct A/C Compressor installation procedures must be followed, incorrect installation may damage the A/C Compressor and void your warranty. Please familiarise yourself with the following steps before installing your new A/C Compressor.

    (1) Whenever a compressor is to be replaced the oil in the old compressor must be drained and examined. Compressor oil should always look “clean”. If there is any water, moisture, sludge, discolouration or metal particles present, the entire A/C System must be thoroughly flushed with an approved flushing agent and the Receiver/Drier or Descant bag and Condenser replaced. Failing to do this will Void your warranty.

    (2) The receiver/drier or desiccant bag must also be replaced.

    (3) If your vehicle is equipped with an orifice tube it should be inspected and replaced if necessary.

    (4) Parallel flow condensers cannot be thoroughly flushed, if there is any contamination it must be replaced. Tube and fin condensers can be flushed and do not need replacing.

    (5) All our compressors come pre-charged with oil, it is advised that the oil from both A/C Compressors is drained into separate containers and measured. Refill the new A/C Compressor with the same amount of oil that was drained from your original Compressor. If the entire A/C System has been flushed, refill the Compressor oil to your vehicle manufacturers specifications. Always make sure you use the correct type of Compressor oil.(This information will often be located on a decal under the bonnet or on the radiator support panel.)

    (6) Once fitted and oil charge is complete, rotate the compressor clutch by hand a minimum of 10 times. A concentration of oil in the compressor can cause damage on initial start-up. (By doing this step this scenario can be avoided.)

    (7) Once the system is flushed and new parts installed, the system should be evacuated for a minimum of 45 minutes to evaporate any remaining solvent or moisture before regassing.

    (8) Recharge your A/C Compressor with the correct amount of refrigerant.

    (9) Any compressor returned will be assessed as the root cause for it failing before a warranty claim can be accepted. If there is cross contamination or the compressor has been “running dry” ( inadequate amount of oil ) or a new receiver/ drier or Desiccant bag had not been fitted in that circumstance no warranty claim will be accepted.

    In the unlikely event you need to make a warranty claim please attach a copy of your receipt from your Mechanic or Auto Electrician clearly showing a new receiver/ drier or desiccant bag had been fitted to your vehicle at the time your Compressor was installed. If installation was not done by a mechanical workshop you will need to provide us a copy of a verifiable receipt clearly showing a new receiver/ drier or desiccant bag suited to your vehicle had been purchased.

    Warranty strictly covers parts only, sold by us from the original date of purchase. We accept no liability for any consequential loss, damage, or any other associated costs. By purchasing from us you agree to these terms.

  • Backorders
    Any item showing as “Available on backorder” is not currently held in our inventory. Procurement lead times can vary between one business day up to 12 weeks. We advise you contact us prior to making a purchase on products showing as “Available on backorder “ so we can give an accurate estimate on lead times.