Air Conditioning A/C Compressor Clutch Pulley Remover


Our Price: $75.00 inc.GST

A gear puller is an incredibly handy tool for the removal of A/C compressor pulleys. The centre of the bolt on the puller has a pointed centre allowing it to locate in the centre point of the shaft that the gear or pulley is mounted on. With the three outer jaws firmly locked behind the gear or pulley, the bolt on the gear puller can then be tightened allowing the jaws to slowly pull the gear off the spline shaft. This 3 Jaw 150mm gear puller is made from incredibly tough drop forged vanadium steel to ensure no breakages occur from the high tension that can be exerted during pulling. This puller has a 6″ or 150mm capacity which is large enough for most automotive compressors. 

Part Number CCA-26859

In stock


Product Description

Compressor Clutch Pulley Remover Tool, Specifically Designed For The Removal Of  Automotive A/C Compressor Clutch Pulleys.


1. Durable steel forging: overall heat treatment, large torque, good toughness, and strong top-drawing.

2. Thick connection: stable connection, more stable and powerful.

3. Puller detachable bearing: disassemble the ball bearing, adjust the screw rod, and fix the disassembled object.

4. Smooth thread: smoother and save time.

5. Small and easy to carry: The product is small in size, light in weight, takes up little space, and is easy to take away.


This product is a bearing puller with integral heat treatment, large torque, good toughness, and strong jacking.


Working range: 35-75 mm

Pull: 1000kg

Thread stroke: 60mm

Total length of screw rod: 105mm

Screw diameter: 12mm

Top hexagon of centre rod: 12mm

Claw length (inches): 90mm

Size:3 inch

Additional Information

Weight 1 kg
  • Fitment
    We have Thousands of Part Numbers within our database for easy part/s identification. Simply enter your Original Part Number/s into the search bar and an instant match will often result. Images shown within our listings are for comparison purposes only. All genuine parts have the word “Genuine” in the title description. Any part branded as “Cool Car” in the product description is our own brand not OEM. Because there are often several options on some vehicles a Visual Comparison to your Original Part is Highly Recommended to avoid any possibility of purchasing the wrong part, It is the responsibility of the purchaser to determine if the listed part is correct for the intended purpose. If you are unsure, please contact our friendly support team prior to purchase.
  • Returns
    Returns are accepted for credit or refund within 30 days of purchase. Parts returned for credit will be credited the purchase price minus shipping fees. Parts returned for refund incur a 15% restocking fee. The purchaser is responsible for all return shipping costs. Fitted parts cannot be returned.

    Download Return Form

  • Warranty

    All new a/c parts come with a one year manufacturers warranty from the original date of purchase.

    Incorrect compressor installation procedures can damage your new unit and void your warranty. Please familiarise yourself with the following steps prior to installation.

    (1) Remove the original compressor, drain, measure and examine the oil. If there is any moisture, sludge, discoloration ( black or grey oil ) or metal particles present, the entire a/c system must be thoroughly flushed with an approved flushing agent prior to the installation of your new unit.

    (2) The receiver/drier or desiccant bag must be replaced. Failing to do this will void your warranty.

    (3) If your vehicle is equipped with an orifice tube it should be inspected and replaced if necessary.

    (4) Parallel flow condensers cannot be thoroughly flushed, if there is any contamination it must be replaced. Tube and fin condensers can be flushed and do not need replacing.

    (5) All our compressors come pre-filled with oil, it is advised that the oil from both compressors is drained and measured. Refill the new a/c compressor with the same amount of oil that was drained from your original unit. Or refill the compressor with oil to your vehicle manufacturers specifications. Make sure you use the correct type of compressor oil. (This information will often be located on a decal under the bonnet or on the radiator support panel.)

    (6) Once fitted, rotate the compressor clutch by hand a minimum of 10 times. A concentration of oil in the compressor can cause damage during the first initial start-up.

    (7) Once the system is flushed and new parts installed, the system should be evacuated for a minimum of 45 minutes to evaporate any remaining solvent or moisture.

    (8) Recharge your a/c compressor with the correct amount of refrigerant.

    (9) Any compressor returned for warranty purposes will be assessed as the root cause for it failing prior to a warranty claim being accepted. The buyer is responsible for the return shipping costs back to us.

    In the event you need to make a warranty claim, please attach a copy of your receipt from your licensed workshop clearly showing a new receiver/ drier or desiccant bag had been fitted to your vehicle at the time of compressor installation. If installation was not carried out by a licensed workshop you are required to provide us a copy of a verifiable receipt clearly showing a new receiver/ drier or desiccant bag suited to your vehicle had been purchased.

    We accept no liability for any consequential loss, damage, or any other associated costs. By purchasing from us you agree to these terms.

    Warranty Claim Form

  • Backorders
    Any item showing as “Available on backorder” is not currently held in our inventory. Procurement lead times can vary between one business day up to 12 weeks. We advise you contact us prior to making a purchase on products showing as “Available on backorder “ so we can give an accurate estimate on lead times.